Effect of Cashew Nut Shell Oil as Cutting Fluid in Turning Operation
Cutting Fluids, Surface Finish, Machining Process, Physiochemical Properties, Surface Roughness.
Cutting fluids are widely used to obtain longer tool life and better surface finish of the component. In current situation petroleum or mineral oils are used as an alternative cutting fluid in machining process. In this paper bio oil is prepared from the cashew nut shell and physiochemical properties are tested. The bio oil is blended with existing 20w40 oil and blend sample properties are determined. The blended oil were used as cutting fluid in lathe. The properties like viscosity, fire point and flash point for this bio oil shows that this oil is suitable for cutting fluid. After machining surface roughness is tested by using surface roughness tester SJ-210. The result of surface roughness is compared with existing cutting fluid. An experimental result shows that the prepared oil has excellent surface finish. Hence the paper proposes an alternative cutting fluid.
"Effect of Cashew Nut Shell Oil as Cutting Fluid in Turning Operation", IJSDR - International Journal of Scientific Development and Research (www.IJSDR.org), ISSN:2455-2631, Vol.4, Issue 3, page no.75 - 79, March-2019, Available :https://ijsdr.org/papers/IJSDR1903016.pdf
Volume 4
Issue 3,
March-2019
Pages : 75 - 79
Paper Reg. ID: IJSDR_190186
Published Paper Id: IJSDR1903016
Downloads: 000347224
Research Area: Engineering
Country: Thanjavur, Tamilnadu, India
ISSN: 2455-2631 | IMPACT FACTOR: 9.15 Calculated By Google Scholar | ESTD YEAR: 2016
An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 9.15 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator
Publisher: IJSDR(IJ Publication) Janvi Wave
