INTERNATIONAL JOURNAL OF SCIENTIFIC DEVELOPMENT AND RESEARCH International Peer Reviewed & Refereed Journals, Open Access Journal ISSN Approved Journal No: 2455-2631 | Impact factor: 8.15 | ESTD Year: 2016
open access , Peer-reviewed, and Refereed Journals, Impact factor 8.15
Ring Analysis and FEM Modelling For Manufactured Composite for the Piston Ring Material and Post-Performance-Based Validation
Authors Name:
Ashok Kumar Bishnoi
, Naveen Ghanghas
Unique Id:
IJSDR2008046
Published In:
Volume 5 Issue 8, August-2020
Abstract:
The research reported in paper includes two separate hybrid experiments: grene / graphite and fleash / graphite, 4 Similar checks. Two independent Research Analysis of findings based on experimental and FEM models. Creation of engineered composite for piston ring material and performance-based testing. This study focuses on 7075 hybrid alloy composites in this modeling and experimental inquiry. The wear tests detected under SEM observation demonstrate oxide layer development, i.e. mechanical, iron- and aluminum-oxide mixed coating, which leads to the composite material's enhanced wear resistance. Sliding wear pattern and SEM tests splits are also well known. The Taguchi approach is used to refine experimental wear parameters. And the main parameters were load, followed by reinforcement and sliding speed. The required temperature and moving size parameters. FEM ring research indicates validity of the proposed piston ring material. And the stresses created in the piston configuration were found to be below normal limits. Based on various critical parameters for a material to be used as piston rind in comparative study, the contrast of conventionally used material and the composite created is seen. Another method of composite making as pow we can use metallurgy instead of stir-casting.
Keywords:
Grene, Fleash, FEM models, SEM tests, FEM ring, spinning motion
Cite Article:
"Ring Analysis and FEM Modelling For Manufactured Composite for the Piston Ring Material and Post-Performance-Based Validation", International Journal of Science & Engineering Development Research (www.ijsdr.org), ISSN:2455-2631, Vol.5, Issue 8, page no.344 - 349, August-2020, Available :http://www.ijsdr.org/papers/IJSDR2008046.pdf
Downloads:
000337071
Publication Details:
Published Paper ID: IJSDR2008046
Registration ID:192371
Published In: Volume 5 Issue 8, August-2020
DOI (Digital Object Identifier):
Page No: 344 - 349
Publisher: IJSDR | www.ijsdr.org
ISSN Number: 2455-2631
Facebook Twitter Instagram LinkedIn