INTERNATIONAL JOURNAL OF SCIENTIFIC DEVELOPMENT AND RESEARCH International Peer Reviewed & Refereed Journals, Open Access Journal ISSN Approved Journal No: 2455-2631 | Impact factor: 8.15 | ESTD Year: 2016
open access , Peer-reviewed, and Refereed Journals, Impact factor 8.15
Design, Analysis And Optimization Of Heavy Metal Roll Lifting Bracket Assembly For Steel Industry : Finite Element Analysis Results
Authors Name:
Mukul Bhalekar
, Prof.Ritesh Banapurkar
Unique Id:
IJSDR1607008
Published In:
Volume 1 Issue 7, July-2016
Abstract:
The existing bracket causes localized pressure on the metal coil thus resulting in indentations on the sheets. Also, this high pressure causes high stresses in this region. The coils are stacked one above another and covered with a metal closure during annealing. The mechanical tong holds the coil at both inner and outer coil surfaces for lifting as shown in Fig.2. The defects (line marks) are observed after the annealing and are identified to happen always at places where the tongs hold the coil for lifting. Due to Tong mark defects, considerable length of steel coils from both the inner diameter (ID) and the outer diameter (OD) portions are scrapped. The line marks are observed running perpendicular to rolling direction in both inner and outer wraps of coils during inspection. They come in the form of lines or flowery pattern perpendicular to the rolling direction extending from one edge of the strip surface. The pitch of the defect is the circumferential distance of the inner wraps (about 2mts.) and gradually reduces in intensity towards center portion of the coil. Thus in this project, Design, Analysis and Optimization of heavy metal roll lifting bracket assembly for steel industry is performed.
Keywords:
Coil, Bracket, Pattern, Sheets.
Cite Article:
"Design, Analysis And Optimization Of Heavy Metal Roll Lifting Bracket Assembly For Steel Industry : Finite Element Analysis Results", International Journal of Science & Engineering Development Research (www.ijsdr.org), ISSN:2455-2631, Vol.1, Issue 7, page no.33 - 40, July-2016, Available :http://www.ijsdr.org/papers/IJSDR1607008.pdf
Downloads:
000337077
Publication Details:
Published Paper ID: IJSDR1607008
Registration ID:160582
Published In: Volume 1 Issue 7, July-2016
DOI (Digital Object Identifier):
Page No: 33 - 40
Publisher: IJSDR | www.ijsdr.org
ISSN Number: 2455-2631
Facebook Twitter Instagram LinkedIn